 |
 |
 |
 |
 |
Speed Clean is excellent for the removal of diesel stains from in and around the pumps as
well as being very effective in removing grease
and stains form the pump handles and paintwork.
Speed Clean is also great for general cleaning inside on floors,
plastics, counters, painted surfaces
and even glass which it helps to
keep the fridge doors from condensating.
Initially mixed at a 10-1 ratio for the removal of tough stains this
can then be diluted down to a
20-1 to maintain these surfaces for
everyday use.
Speed Clean will remove urethane off glass, hands upholstery and carpets without smearing.
Allied Chemicals recommends a pre-spray concentrate at
the beginning of this particular task.
Below we have other applications:
1 Overspray — off brake lights, tyres, glass, interiors
2 Silicone on door jams, tyres, interiors
3 Metal prep primer wash; anti-static, prevents fisheyes, swirls and bubbles
4 Removes baked-on tape
5 Fibreglass is cleaned up by a 20-1 solution
6 Paint oxidation: work in sections, 10-1 solution will restore paint in half
the time
Speed Clean will attack these problems with a 20-1 solution. Takes out salt pits, rust, water stains (ovens)
and can inhibit rust from occuring when used regularly. No white streaks on aluminium.
Use at 20-1 solution, Speed Clean can solve these problems:
1 For stacks, spray directly on and rinse off
surface when carbon appears to
run
2 When using for dipping (in extreme cases) mix a 7-1 solution, soak for
one
hour and rinse (e.g. carbon on piston heads, spoxy glues, silicone, seals
and gaskets)
Speed Clean can be used to shampoo with carpet machine with incredible
results.
Just follow these steps:
1 Vacuum before shampooing
2 Use a 50-1 mixture with water (10-1 for heavy spotting)
3 Add solution to holding
tank
4 Shampoo entire carpet
5 Remove excess moisture from carpet with towels or vacuum if necessary.
Speed Clean can be used without a machine and will remove wine,
grease, blood — virtually everything except
dyes. Suggested dilution: 30-1
Speed Clean will replace varsal, carb-cleaner, WD-40 and handle your dipping tanks at 7-1 or 10-1.
Speed Clean used at full strength, has been proven through laboritory testing. It significantly reduces contamination from Methamphetamine, and the chemicals used in manufacture including but not limited to; Ephedrine, Amphetamine and Pseudoephedrine. The test sample was found to reduce levels by 97%
Speed Clean can be used in any ultra-sonic machine at a dilution of 80-1. For
the home, Speed Clean can
be used simply by using a cup of solution (40-1)
and a slow circular motion which will add lustre and shine to
the pieces. Rinse
and pat dry with a clean cloth.
Speed Clean can be used as a pre-spray on clothing (avoid satin, silk and
soft leather), removing virtually
every stain. The results are astonishing. Whether
it be tar, grease, oil, blood, inks, make-up or grass.
Speed Clean will reduce expenses drastically in your laundry room. solution 30-1.
As you can see, Speed Clean can be used on any surface. However, a
few rules should be followed:
1 Always mix Speed Clean with water. Sea water also may be used. The product should not be used stronger
than 7-1 solution
2 Always test for colour-fastness when using Speed Clean on fabrics.
Keeping this in mind,
you will find Speed Clean economical, quick
and easy to use, and maybe even fun!
3 Write to us for more
information on its use in undertaking special
projects
4 Speed Clean is not available through stores.
Contact your company Rep 021 1395589